4 Yoga Wall Ropes
Set of 4 wall ropes ( 2 long and 2 short) made to order.
- Buy 10 for $57.75 each and save 15%
Set of 4 made to order wall ropes. Manufactured from 12mm double braid rope.
Each set consists of two ropes for wall hooks 1m from floor and two ropes for wall hooks 2m from floor.
Wall ropes help practitoners practice non weight vbearing inversions and dog pose. Also suited for use on therapeutic and restorative yoga.
Other lengths available on request.
Eye Nuts also available.
Colours: White only, white with blue fleck, white with red fleck, solid black
Allow 5-7 working days from order to dispatch.
Please consult a builder and/or engineer before fixing hooks to walls to ensure that the structure and proposed installation is capable of supporting the loads.
MADE TO ORDER
The following is offered as a guide only.
Anchor bolts - Minimum withdrawal load capacity of 200kg.
Anchor bolts should be steel with a minimum diameter of 12mm.
Walls - Allow 200 kg of horizontal force per rope set applied at a height of 2 metres from floor.
Location of anchors
Top ropes: distance from floor 2000 mm
Middle ropes: distance from floor 1000 mm
Bottom ropes (optional- Email for quote): distance from floor 40 mm
Horizontal distance between ropes: 450 mm
Horizontal distance between sets of ropes (minimum) 600 mm
Top rope length: 1150 mm (When folded in two and drawn taut)
Middle rope length: 930 mm (When folded in two and drawn taut)
Rope material: 12mm double-braided polypropylene.
Ensure wall structure is strong enough for applied loads. Allow 200 kg of horizontal force per rope set.
Remember people are often killed when brick walls fall on them. Slam dunking basket balls has caused this to happen! (This seems to happen with relatively unsupported walls of outbuildings. Be careful!!
In masonry walls several types of fixing can be used.
The most common type is the "Dyna Bolt" available from hardware shops. These are best used in solid walls such as concrete or relatively solid bricks. Use 12mm diameter and take note of the recommended hole diameter.
Where the masonry wall has cavities such as in many clay or concrete bricks, it is satisfactory to use a special adhesive such as (Ramset) "Chemset" With this stuff the holes are drilled and then filled with adhesive before inserting the anchor bolts. The adhesive then sets fixing the anchor.
In both cases either 12mm eye bolts (bolts with an eye loop on the end) or plain threaded rod (studs) can be used. With the latter, an eye nut (12mm) is screwed on after the anchor is set.
In timber framed walls several techniques could be used.
You can pass a bolt right through the wall from the other side. If the studs in the wall are conveniently place at the appropriate spacing (450mm) you can pass the bolts right through the studs. Coach bolts (12mm) would be best.
If the studs are not conveniently spaced you will need to fix a horizontal baton across the wall (on the oppoiste side to the ropes) passing over at least 2 studs. This should be at least 20mm thick X 40mm wide. The bolts will pass through the batons, the heads of the bolts resting on the battons. You may also need a baton on the rope side of the wall if the wall ling material is soft such as plaster.
An alternative method if you do not have access to the back of the wall is to fix heavy batons (minimum 25mm x 50mm) to the rope side of the wall only and to pass the rope anchor bolts through these batons only (not through the wall). These batons need to be securely fixed to the wall studs using 10mm dia coach screws. There should be at least as many coach screws attaching the baton to the studs as there are ropes attached to the batons. The ropes will be attached to the baton using 12mm dia bolts, either eye bolts as above with nuts on the back side of the baton which will have to be let into the wall surface or by coach bolts whose heads are at the back of the baton with eye nuts screwed to the rope side for the ropes to attach to.
The risks associated with the connections failing are great so we strongly recommend you consult a builder or engineer for installation.